Ivy Bridge
config.plist cho hệ thống
Last updated
config.plist cho hệ thống
Last updated
Initial macOS Support
OS X 10.7, Lion
Last Supported OS
macOS 11, Big Sur
So making a config.plist may seem hard, it's not. It just takes some time but this guide will tell you how to configure everything, you won't be left in the cold. This also means if you have issues, review your config settings to make sure they're correct. Main things to note with OpenCore:
All properties must be defined, there are no default OpenCore will fall back on so do not delete sections unless told explicitly so. If the guide doesn't mention the option, leave it at default.
The Sample.plist cannot be used As-Is, you must configure it to your system
DO NOT USE CONFIGURATORS, these rarely respect OpenCore's configuration and even some like Mackie's will add Clover properties and corrupt plists!
Now with all that, a quick reminder of the tools we need
Universal plist editor
For generating our SMBIOS data
See previous section on how to obtain:
WARNING
Read this guide more than once before setting up OpenCore and make sure you have it set up correctly. Do note that images will not always be the most up-to-date so please read the text below them, if nothing's mentioned then leave as default.
Info
For us we'll need a couple of SSDTs to bring back functionality that Clover provided:
Makes all _OSI calls specific to Windows work for macOS (Darwin) Identifier. This may help enabling some features like XHCI and others.
Needed to add a missing IMEI device on Ivy Bridge CPU with 6 series motherboards, not needed for 7 series motherboards
Note that you should not add your generated DSDT.aml here, it is already in your firmware. So if present, remove the entry for it in your config.plist and under EFI/OC/ACPI.
Info
Removing CpuPm:
All
Boolean
YES
Comment
String
Delete CpuPm
Enabled
Boolean
YES
OemTableId
Data
437075506d000000
TableLength
Number
0
TableSignature
Data
53534454
Removing Cpu0Ist:
All
Boolean
YES
Comment
String
Delete Cpu0Ist
Enabled
Boolean
YES
OemTableId
Data
4370753049737400
TableLength
Number
0
TableSignature
Data
53534454
Info
This section allows us to dynamically modify parts of the ACPI (DSDT, SSDT, etc.) via OpenCore. For us, we'll need the following:
OSI rename
This is required when using SSDT-XOSI as we redirect all OSI calls to this SSDT
Enabled
Boolean
YES
Count
Number
0
Limit
Number
0
Find
Data
5f4f5349
Replace
Data
584f5349
Settings relating to ACPI, leave everything here as default as we have no use for these quirks.
This section is dedicated to quirks relating to boot.efi patching with OpenRuntime, the replacement for AptioMemoryFix.efi
This section is allowing spaces to be pass-through to macOS that are generally ignored, useful when paired with DevirtualiseMmio
Info
Settings relating to boot.efi patching and firmware fixes, for us, we leave it as default
Sets device properties from a map.
PciRoot(0x0)/Pci(0x2,0x0)
The config.plist doesn't already have a section for this so you will have to create it manually.
When setting up your iGPU, the table below should help with finding the right values to set. Here is an explanation of some values:
AAPL,ig-platform-id
This is used internally for setting up the iGPU
Type
Whether the entry is recommended for laptops(ie. with built-in displays) or for Intel NUCs(ie. stand alone boxes)
Generally follow these steps when setting up your iGPU properties. Follow the configuration notes below the table if they say anything different:
When initially setting up your config.plist, only set AAPL,ig-platform-id - this is normally enough
If you boot and you get no graphics acceleration (7MB VRAM and solid background for dock), then you likely need to try different AAPL,ig-platform-id values, add stolenmem patches, or even add a device-id property.
03006601
Laptop
To be used with 1366 by 768 displays or lower
04006601
Laptop
To be used with 1600 by 900 displays or higher, see below for addition patches
09006601
Laptop
To be used with some devices that have eDP connected monitor (contrary to classical LVDS), must be tested with 03006601 and 04006601 first before trying this.
0B006601
NUC
To be used with Intel NUCs
VGA is not supported (unless it's running through a DP to VGA internal adapter, which apparently only rare devices will see it as DP and not VGA, it's all about luck.)
If you're using 04006601 as your ig-platform-id, you may need to add the following parameters to fix external outputs as otherwise you will only have one output. (Credit to Rehabman)
framebuffer-patch-enable
Number
1
enabling the semantic patches in principle (from the WhateverGreen manual)
framebuffer-memorycount
Number
2
Matching FBMemoryCount to the one on 03006601 (1 on 04 vs 2 on 03)
framebuffer-pipecount
Number
2
Matching PipeCount to the one on 03006601 (3 on 04 vs 2 on 03)
framebuffer-portcount
Number
4
Matching PortCount to the one on 03006601 (1 on 04 vs 4 on 03)
framebuffer-stolenmem
Data
00000004
framebuffer-con1-enable
Number
1
This will enable patching on connector 1 of the driver. (Which is the second connector after con0, which is the eDP/LVDS one)
framebuffer-con1-alldata
Data
02050000 00040000 07040000 03040000 00040000 81000000 04060000 00040000 81000000
When using all data with a connector, either you give all information of that connector (port-bused-type-flag) or that port and the ones following it, like in this case.
In this case, the ports in 04 are limited to 1:
05030000 02000000 30020000 (which corresponds to port 5, which is LVDS)
However on 03 there are 3 extra ports:
05030000 02000000 30000000 (LVDS, con0, like 04)
02050000 00040000 07040000 (DP, con1)
03040000 00040000 81000000 (DP, con2)
04060000 00040000 81000000 (DP, con3)
Since we changed the number of PortCount to 4 in a platform that has only 1, that means we need to define the 3 others (and we that starting with con1 to the end).
PciRoot(0x0)/Pci(0x16,0x0)
Sandy/IvyBridge Hybrids:
To know if you're affected check if your CPU is an Intel Core ix-3xxx and your chipset is Hx6x (for example a laptop with HM65 or HM67 with a Core i3-3110M) through tools like AIDA64.
In your config add a new PciRoot device named PciRoot(0x0)/Pci(0x16,0x0)
device-id
Data
3A1E0000
PciRoot(0x0)/Pci(0x1b,0x0)
layout-id
You can delete this property outright as it's unused for us at this time
Removes device properties from the map, for us we can ignore this
Here's where we specify which kexts to load, in what specific order to load, and what architectures each kext is meant for. By default we recommend leaving what ProperTree has done, however for 32-bit CPUs please see below:
Needed for spoofing unsupported CPUs like Pentiums and Celerons
Cpuid1Mask: Leave this blank
Cpuid1Data: Leave this blank
Used for loading kexts off system volume, only relevant for older operating systems where certain kexts are not present in the cache(ie. IONetworkingFamily in 10.6).
For us, we can ignore.
Blocks certain kexts from loading. Not relevant for us.
Patches both the kernel and kexts.
Info
Settings relating to the kernel, for us we'll be enabling the following:
AppleCpuPmCfgLock
YES
Not needed if CFG-Lock is disabled in the BIOS
DisableIoMapper
YES
Not needed if VT-D is disabled in the BIOS
LapicKernelPanic
NO
HP Machines will require this quirk
PanicNoKextDump
YES
PowerTimeoutKernelPanic
YES
XhciPortLimit
YES
Disable if running macOS 11.3+
Settings related to legacy booting(ie. 10.4-10.6), for majority you can skip however for those planning to boot legacy OSes you can see below:
Info
HideAuxiliary
YES
Press space to show macOS recovery and other auxiliary entries
Info
Helpful for debugging OpenCore boot issues(We'll be changing everything but DisplayDelay):
AppleDebug
YES
ApplePanic
YES
DisableWatchDog
YES
Target
67
Info
Security is pretty self-explanatory, do not skip. We'll be changing the following:
AllowSetDefault
YES
BlacklistAppleUpdate
YES
ScanPolicy
0
SecureBootModel
Default
Leave this as Default for OpenCore to automatically set the correct value corresponding to your SMBIOS. The next page goes into more detail about this setting.
Vault
Optional
This is a word, it is not optional to omit this setting. You will regret it if you don't set it to Optional, note that it is case-sensitive
Used for serial debugging (Leave everything as default).
Used for running OC debugging tools like the shell, ProperTree's snapshot function will add these for you.
Used for specifying irregular boot paths that can't be found naturally with OpenCore.
4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14
Used for OpenCore's UI scaling, default will work for us. See in-depth section for more info
4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102
OpenCore's NVRAM GUID, mainly relevant for RTCMemoryFixup users
7C436110-AB2A-4BBB-A880-FE41995C9F82
System Integrity Protection bitmask
General Purpose boot-args:
-v
This enables verbose mode, which shows all the behind-the-scenes text that scrolls by as you're booting instead of the Apple logo and progress bar. It's invaluable to any Hackintosher, as it gives you an inside look at the boot process, and can help you identify issues, problem kexts, etc.
debug=0x100
This disables macOS's watchdog which helps prevents a reboot on a kernel panic. That way you can hopefully glean some useful info and follow the breadcrumbs to get past the issues.
keepsyms=1
This is a companion setting to debug=0x100 that tells the OS to also print the symbols on a kernel panic. That can give some more helpful insight as to what's causing the panic itself.
alcid=1
GPU-Specific boot-args:
-wegnoegpu
Used for disabling all other GPUs than the integrated Intel iGPU, useful for those wanting to run newer versions of macOS where their dGPU isn't supported
csr-active-config: 00000000
Settings for 'System Integrity Protection' (SIP). It is generally recommended to change this with csrutil via the recovery partition.
run-efi-updater: No
This is used to prevent Apple's firmware update packages from installing and breaking boot order; this is important as these firmware updates (meant for Macs) will not work.
prev-lang:kbd: <>
Needed for non-latin keyboards in the format of lang-COUNTRY:keyboard, recommended to keep blank though you can specify it(Default in Sample config is Russian):
American: en-US:0(656e2d55533a30 in HEX)
Hint: prev-lang:kbd can be changed into a String so you can input en-US:0 directly instead of converting to HEX
Hint 2: prev-lang:kbd can be set to a blank variable (eg. <>) which will force the Language Picker to appear instead at first boot up.
prev-lang:kbd
String
en-US:0
Forcibly rewrites NVRAM variables, do note that Add will not overwrite values already present in NVRAM so values like boot-args should be left alone.
LegacySchema
Used for assigning NVRAM variables, used with OpenVariableRuntimeDxe.efi. Only needed for systems without native NVRAM
WriteFlash: YES
Enables writing to flash memory for all added variables.
Info
For this Ivy Bridge example, we'll chose the iMac13,2 SMBIOS - this is done intentionally for compatibility's sake. The typical breakdown is as follows:
MacBookAir5,1
Dual Core 17W
iGPU: HD 4000
11"
MacBookAir5,2
Dual Core 17W
iGPU: HD 4000
13"
MacBookPro10,1
Quad Core 45W
iGPU: HD 4000 + dGPU: GT 650M
15"
MacBookPro10,2
Dual Core 35W(High End)
iGPU: HD 4000
13"
Macmini6,1
Dual Core NUC
iGPU: HD 4000
N/A
Macmini6,2
Quad Core NUC
iGPU: HD 4000
N/A
Note: The following SMBIOS are only supported up-to and including macOS 10.15, Catalina. For cases where you must boot Big Sur, see below:
Run GenSMBIOS, pick option 1 for downloading MacSerial and Option 3 for selecting out SMBIOS. This will give us an output similar to the following:
The Type part gets copied to Generic -> SystemProductName.
The Serial part gets copied to Generic -> SystemSerialNumber.
The Board Serial part gets copied to Generic -> MLB.
The SmUUID part gets copied to Generic -> SystemUUID.
Automatic: YES
Generates PlatformInfo based on Generic section instead of DataHub, NVRAM, and SMBIOS sections
:::
ConnectDrivers: YES
Forces .efi drivers, change to NO will automatically connect added UEFI drivers. This can make booting slightly faster, but not all drivers connect themselves. E.g. certain file system drivers may not load.
Add your .efi drivers here.
Only drivers present here should be:
HfsPlus.efi
OpenRuntime.efi
By default, OpenCore only loads APFS drivers from macOS Big Sur and newer. If you are booting macOS Catalina or earlier, you may need to set a new minimum version/date. Not setting this can result in OpenCore not finding your macOS partition!
macOS Sierra and earlier use HFS instead of APFS. You can skip this section if booting older versions of macOS.
APFS Versions
Both MinVersion and MinDate need to be set if changing the minimum version.
High Sierra (10.13.6)
748077008000000
20180621
Mojave (10.14.6)
945275007000000
20190820
Catalina (10.15.4)
1412101001000000
20200306
No restriction
-1
-1
Related to AudioDxe settings, for us we'll be ignoring(leave as default). This is unrelated to audio support in macOS.
Relating to OpenCore's visual output, leave everything here as default as we have no use for these quirks.
Info
Relating to quirks with the UEFI environment, for us we'll be changing the following:
IgnoreInvalidFlexRatio
YES
ReleaseUsbOwnership
YES
UnblockFsConnect
NO
Needed mainly by HP motherboards
Used for exempting certain memory regions from OSes to use, mainly relevant for Sandy Bridge iGPUs or systems with faulty memory. Use of this quirk is not covered in this guide
This is where you'll add SSDTs for your system, these are very important to booting macOS and have many uses like , and such. And with our system, it's even required to boot. Guide on making them found here:
Needed for proper CPU power management, you will need to run Pike's ssdtPRGen.sh script to generate this file. This will be run in .
Fixes the embedded controller, see for more details.
Fixes brightness control, see for more details. Note that Intel NUCs do not need this
For those wanting a deeper dive into dumping your DSDT, how to make these SSDTs, and compiling them, please see the page. Compiled SSDTs have a .aml extension(Assembled) and will go into the EFI/OC/ACPI folder and must be specified in your config under ACPI -> Add as well.
This blocks certain ACPI tables from loading, for us we really care about this. Main reason is that Apple's XCPM does not support IvyBridge all too well and can cause AppleIntelCPUPowerManagement panics on boot. To avoid this we make our own PM SSDT in and drop the old tables(Note that this is only temporary until we've made our SSDT-PM, we'll re-enable these tables later):
This section is set up via WhateverGreen's and is used for setting important iGPU properties.
Configuration Notes
Matching STOLEN memory to 64MB (0x04000000 from hex to base 10 in Bytes) to the one on 03006601
Check for more information.
Some laptops from this era came with a mixed chipset setup, using Ivy Bridge CPUs with Sandy Bridge chipsets which creates issues with macOS since it expects a certain ID that it doesn't find and would get stuck at boot(As Apple's iGPU drivers require an ), to fix this we need to fake the IMEI's IDs in these models
Applies AppleALC audio injection, you'll need to do your own research on which codec your motherboard has and match it with AppleALC's layout. .
For us, we'll be using the boot argument alcid=xxx instead to accomplish this. alcid will override all other layout-IDs present. More info on this is covered in the
A reminder that users can run Cmd/Ctrl + Shift + R to add all their kexts in the correct order without manually typing each kext out.
This is actually the 15 port limit patch, don't rely on it as it's not a guaranteed solution for fixing USB. Please create a when possible.
With macOS 11.3+, We recommend users either disable this quirk and map before upgrading or . You may also install macOS 11.2.3 or older.
These values are based of those calculated in
0 allows you to see all drives available, please refer to section for further details. Will not boot USB devices with this set to default
Controls Apple's secure boot functionality in macOS, please refer to section for further details.
Note: Users may find upgrading OpenCore on an already installed system can result in early boot failures. To resolve this, see here:
Won't be covered here, see 8.6 of for more info
To be used in conjunction with RTCMemoryFixup, see here for more info:
Used for setting layout-id for AppleALC, see to figure out which layout to use for your specific system. More info on this is covered in the
csr-active-config by default is set to 00000000 which enables System Integrity Protection. You can choose a number of different values but overall we recommend keeping this enabled for best security practices. More info can be found in our troubleshooting page:
Full list can be found in
For setting up the SMBIOS info, we'll use CorpNewt's application.
We set Generic -> ROM to either an Apple ROM (dumped from a real Mac), your NIC MAC address, or any random MAC address (could be just 6 random bytes, for this guide we'll use 11223300 0000. After install follow the page on how to find your real MAC Address)
Reminder that you need an invalid serial! When inputting your serial number in , you should get a message such as "Unable to check coverage for this serial number."
Set to 0 for automatic type detection, however this value can be overridden if desired. See for possible values
For further use of AudioDxe and the Audio section, please see the Post Install page:
Related to boot.efi keyboard passthrough used for FileVault and Hotkey support, leave everything here as default as we have no use for these quirks. See here for more details:
Mainly relevant for Virtual machines, legacy macs and FileVault users. See here for more details:
